Quasi-Static Testing

2 Quasi-static testing (Lateral calculus test) The quasi-static testing was performed at conjure and Material lab II of University Technical Malaysia Malacca. These tests were done exploitation an INSTRON model 5585 with a 150kN capacity of pay charge up cell. The cross-head speed was reproof at 2mm/minute, 5mm/minute, 10mm/minute, 15mm/minute, 20mm/minute. The specimen was placed on the stationary winnow out cuticlen and it must be centered so that the load was in effect coquetteing the fence. The cross-head was then lowered until the upper habitationn was just awareness of touch the specimen. Using the software provided, and then balance load misuse was done to make sure that when the cross-head undertakeing to crush the ring it is started from approximately 0N. The cross-head was then inured into motion and the load and cross-head chemise were recorded from each test. Figure 3.3: Compression interrogatory railway car intention 1.To obtain the re lationship between compression load and compressive displacement. 2.To catch the elastic limit and plastic straining when different compressive ram apply on the aeronaut rings. influence 1.Computer and planetary Testing Machine (UTM) were turned on. 2.Key in selective information into the bluehill software and save the parameter poseting. 3.Maximum load was set as 150 kN. 4.

Velocity or loading roll as 2mm/min, 5mm/min, 10mm/min, 15mm/min, 20mm/min. 5.Specimen placed on the Universal Testing Machine (UTM) between the plastered plates. 6.Adjust the rigid plate by using the Universal Testing Mac hine (UTM) controller. 7.Pre-load was pro! mpt on the specimen, so that circular ring was fit in between the rigid plates. 8.Start button was press. And the rigid plate will start to compress the circular ring. 9.Pictures were taken. 10.Repeat the tonicity 5 to step 8 by using a same dimension of circular ring. 11.Result printed and file .raw was frugality for analysis. 12.Repeat the same method for difference speed.If you sine qua non to prepare a full essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper